Orbis Marine
The Orbis Marine range
Orbis Marine conventional fire detectors offer a wealth of features to save time, enhance reliability and reduce false alarms within the marine environment.
These include drift compensation and DirtAlert®, a feature that warns Service Engineers via a flashing yellow LED that detectors need maintenance; and patented FasTest®, a procedure that takes just four seconds to test smoke detectors and confirm that they are functioning correctly.
Key features of Orbis Marine:
- Approved for use in marine environments
- Modern, low-profile design
- TimeSaver Base for fast installation
- Transient rejection for false alarm reduction
- High humidity tolerance at up to 98%RH
- Wide operating temperature -40°C to +70°C
Orbis Marine Optical Smoke Detector
The Orbis Marine Optical Smoke Detector operates on the well established light scatter principle. However, the sensing technology is radically different in design from previous optical detectors and significantly reduces false alarms.
Orbis Marine Multisensor Detector
The Orbis Marine Multisensor Detector benefits from the same false alarm reduction technology as the optical detector, with the addition of a heat sensing element.
Orbis Marine Heat Detector
The Orbis Marine Heat Detector uses a single thermistor to sense the air temperature around the detector. There are twelve heat detectors in the Orbis Marine range designed to suit a wide variety of operating conditions.
Orbis Marine TimeSaver® Base
The Orbis Marine TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure.
Orbis Marine Relay Base
The Orbis Marine Relay Base incorporates a single-pole voltage-free change over contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state. The contact will remain in this condition until the detector is reset.
Marine Series 65 Base Mounted UV Flame Detector
The Marine Series 65 Base Mounted UV Flame Detector is designed to protect enclosed indoor areas where open flaming fires may be expected. The detector has a fast acting response to flames up to 25m away and is equipped with a single UV sensor with a narrow spectral response in order to discriminate between flames and most spurious sources of radiation.
Get Expert Fire & Gas Safety Solutions Today
Speak with our specialists to design, upgrade, or maintain your fire and gas safety systems.